Should You Invest in Triple Pane Windows? | Frisco, TX

Should You Invest in Triple Pane Windows? | Frisco, TX

Photo By stockfour at Shutterstock

You have finally decided to give your home a fresh, new look and have now started to think about replacing your windows to complete that look. With the abundance of options that are available, it can be a bit though to find the perfect type of window that’s ideal for your home.

If it has come down to choosing between what’s the better option if you live in the Frisco, TX area, double pane or triple pane windows, you’re at the right place. We’ll guide you about the differences between the two and help you figure out which one of the two you should go for.

Overall Comparison

When you compare the triple pane windows with regular double pane windows, the phrase ‘more is better’ stands true. Regardless of whichever aspect you’re looking at it from, whether it’s the energy efficiency, the feature to block outside noise, or the weight to the two kinds of windows; you’ll notice that when you use the triple pane windows the additional third layer does give it an edge over the other.

While the double pane windows consist of two panes of glass placed together and a filler of argon or krypton gas is inserted in between the two panes. Triple pane windows are built employing three glass layers that consist of two layers of gasses in the middle of each pane.

Argon gas is available in cheaper rates and it is able to reduce the transfer of temperature. Whereas krypton gas has higher density compared to argon. This means that it helps to provide even more efficiency to minimize the transfer of temperature.

The merchandiser, which is dependent on the window brand that you purchase from, usually utilizes a spacer system that upholds the glass panes at the correct distance from each other. Additionally, it will help them to create a tighter seal that will stop the gas from leaking out. By installing a good spacer system, you can enjoy a peaceful environment in your home.

The extra pane of glass results in making the them heavier and thicker in comparison to double pane windows. These windows are usually one-inch thicker, and double pane windows are retailed as triple-quarter of an inch model, seven-eighths of an inch model, or a one-inch thick model. For most of the homeowners, the thickness and weight of the windows don’t really matter, as long as the replacement windows properly fit into a well-built frame made using vinyl or fiberglass.

Which Type Provides Increased Energy Efficiency?

The additional third pane of glass produces a difference in the performance of the windows. When you purchase any of the two type of windows, you’d notice that they come with an NFRC (National Fenestration Rating Council) label indicating a rating based on the following features

  • R value is the method of measuring efficiency, which means the higher the number the better the window’s ability to resist heat. Normally the values fall between 0.9 and 3.0. Consumers that require improved energy efficiency should pay close attention to this number.
  • U factor refers to the amount of heat which is lost through the window; this means that a lower u-value number is better. As indicated by the NFRC, the U-factor of most windows lies somewhere between 0.15 and 1.20.
  • Low E, or low emissivity, refers to the designates window was treated with a metal coating which helps to reflect and emit heat energy.
  • SHGC (Solar Heat Gain Coefficients) accounts for how much heat is being blocked from the sun by the windows. A lower number of SHGC indicates that the window has the ability to block more heat gain. The value typically falls between 0 and 1.
  • VT value (Visible Transmittance) is the sunlight amount during daylight that passes through the window, despite if it is tinted.

When getting replacement windows, make sure they have an Energy Star® label on them. This Energy Star label represents that they’ve fulfilled the minimum standards for insulation set by the Department of Energy and the Environmental Protection Agency. Match the zone in which your house is to the zone for which the window has been labeled, as climate zones and insulation requirements are different, depending on where you live.

The best windows that come with Energy Star® compliance, involve a combination of high R-value and VT levels. In addition, they tend to have less E coatings, lower U-values and lower SHGC.

The double pane windows are able to reduce heat loss by half, whereas triple pane windows have the ability to limit the heat loss by around 20 to 30 percent. When you install triple pane windows they will provide improved results for thermal conductivity and the u-factor is also lower in them.

Both the double pane and the triple pane windows tend to have a low emissivity and come with a metal coat that reflects and emits heat energy.

When you use triple pane windows at your home in the Frisco, TX area, it would darken your house from the inside as it has two coats of the low E material.

Despite that it will make you home much more comfortable as it gives an effect similar to that of reflective and tinted films.

When bringing energy efficiency into consideration, windows that don’t open like foam injected and insulated frames are better compared to the ones that open.

Keep this in mind that the lesser the temperature difference between the inside and outside of your home, the lesser amount of heat transfer will take place.

Final Verdict

Summing up the analysis, we feel that triple pane windows are a better option. If you purchase windows in the Frisco, TX area from a reliable business, this one-time investment would be profitable in the long run.

Energy Window Solutions can provide you with high quality windows in the Frisco, TX area, so you don’t have to look anywhere else.