What are Energy Efficient Windows in Frisco?

What are Energy Efficient Windows in Frisco?

The invention of Energy Efficient windows has revolutionized home insulation. It’s made balancing the monthly budget through cutting back on power much easier. These new Energy Efficient Windows in Frisco allow heat to stay in and cold to keep out so that whatever temperature the home, office or room is, it stays that way for as long as it can. By minimizing heat loss to the surroundings from convection and conduction and by minimizing heat gain the same way, these windows allow the controlled climate of a room to stay that way for much longer than previously possible.

Here are two of the most available and common options of Energy Efficient Windows in Frisco.

Double Pane Windows

Double glazing windows consist of two panes of glass, hence the name. There is a space in between to separate them and the air between the two panes is partially removed or filled with another gas rather than air to limit heat loss and gain through conduction and convection.

Double pane windows can reduce heat loss up to 50%, meaning that you could cut down on your energy bills at the same rate. These windows are usually made from fiberglass frames. They are referred to as Energy Efficient Windows in Frisco.

The cost factor of the Double Pane window is its main benefit. The cost difference between it and the more efficient triple pane window can vary, but there is an estimate that it can vary between 15% and 40%.


The frame material plays a large role in determining the quality of the window. The double pane window does best with fiberglass frames because they are designed in a way that the closed back frame can support a double-glazed window without warping.

Double glazed windows may seem costly at first, but they save you a lot in the long run and are a great investment to save on other utilities such as bills from your heaters and air conditioning units.

A double glaze window has a spacer in between to separate the two panes and it is either filled with argon or krypton gas to improve thermal efficiency and limit heat loss. Argon is by far the more popular choice because it is cheaper than krypton.

The glass that is used in the windows itself can also play a large part in insulation. Using Low-E coating on the glass can help prevent infra red light from entering the home and letting the maximum amount of visible light in. This is called warm edge protection. A heat mirror film is also used in combination with double glazing fiberglass Energy Efficient Windows in Friscoto add an extra layer of insulation.

Triple Pane Windows

Triple pane windows, however expensive they may be compared to double pane windows, are a step up. They have two gaps filled with gases other than air or partially removed of air instead of one. This automatically means that there is an added physical layer of insulation for the household.

The trade off is that the Triple Pane Windows in Frisco are much heavier than the double glazed windows. Using fiberglass frames for these windows can help sustain the windows for longer. However, there is essentially no difference in use when it comes to triple pane windows except that they will provide better insulation. They will open and close the same way as double pane windows depending on your choice of fashion.

As far as the U factor or the thermal efficiency factor of the window goes, it is 20-30% more efficient at mitigating heat loss than a double pane window.


As said before it is much better to use fiberglass for the frame for a triple pane window so that it can last long. Fiberglass frames allow for increased strength and stability and won’t twist, warp or sag overtime.

As for the dual spaces in Triple Pane Windows in Frisco, there is a choice between warm edge spacer technology and a silicone resistant spacer to be used. The latter is resistant to UV light oxidation and offer great argon gas retention.

As with double pane windows, Triple Pane Windows, in Frisco also do well with argon and krypton gas to insulate the home. A Low-E coating can be added to the glass panes on their unexposed surfaces to encourage greater insulation.

Performance Ratings

Energy Efficient Windows in Frisco are rated with a lot of factors that determine their capabilities to keep out heat and retain heat when it’s useful. Here are some of these factors which may help you choose the best Energy Efficient Windows in Frisco for your home, office or commercial building.

U-Factor: It measures the rate of heat transfer and tells you how well the window insulates. The U-factor value generally varies from 0.25 to 1.25 and is measured in BTU/ft2°F.The lower the U-factor, thebetter the insulation is.

Solar Heat gain Coefficient (SHGC): This measures the fraction of solar energy transmitted and tells you how well the product blocks heat caused by sunlight. SHGC is measured on a scale of 0 to 1. The values that are measured range from 0.25 to 0.8 and in this case as well, the lower the SHGC the better.

Air Leakage: It measures the rate at which air passes through the joints in the window. Obviously no window is completely leak proof, but the best ones do a great job at sealing rooms and entire homes. The factor has a unit of cubic feet meter per feet squared. Most industry standards and building codes require that there be an Air Leakage coefficient of 0.3 cfm/ft2.

Condensation Resistance: This measures how well the window resists water build up. Condensation resistance helps keep out rain and the influence of rain from your home. The factor is measured on a scale of 0 to 100 and in this case, the higher the factor the better.

If you want the best Energy Efficient Windows in Frisco contact Energy Window Solutions.