6 Signs That Your Windows Haven’t Been Installed Right | Tips from Your Fort Worth, TX Window Installer
Photo By ronstik at Shutterstock
Whether you’ve DIY-ed your new home windows or hired a professional window installer in the Fort Worth, TX area, if you constantly have the feeling that something is just not right about the installation, give this a read before it’s too late.
Your latest installation doesn’t only have to look good from inside and out, but should operate easily and perform well. For that they need to be fitted properly. A manufacturer’s warranty won’t stand against an improperly installed window, so ensure a proper fix before you make the final payment.
We’ve listed down below all the warning signs that point to a bad window installation or faulty windows.
6 Warning Signs of an Unprofessional Window Installer
If you notice any of these signs, get in contact with the manufacturer or replace your current contractor with a better window installer in the Fort Worth, TX area.
There are Gaps Between the Sill and Frame
The presence of gaps in between the windowsill and the frame is one of the first signs of an ill fitted window installation. This problem stems back to the initial process of installation. As the new replacement window goes in place of the old one, it should be able to fit into the window opening that already exists. For perfect fitting, the window must be measured properly. In case of a DIY installation, it’s likely that you failed to get the right measurements as you don’t have the required expertise. So, it’s better to look for an experienced window installer. However, it’s possible that the window was not measured correctly by the contractor if you notice gaps between the sill and frame. If that happens, check with the replacement window manufacturer about their policies on return of products due to contractor’s error.
The Windows are Drafty
Another indication of a bad window installation is drafty windows. If you can feel a draft when you pass by the windows, this means that something went wrong as air can slip through. Draft means that there’s a lack of proper insulation as there might be gaps between the sashes, frames, and dividers. You should always check if the window installer has done the job right, as such cases can end up with you spending your money on the high electricity bills. In case you’ve already fitted the replacement window on your own and are facing this issue, it’s best to look for a window installerthat will help you fix this problem.
Signs of Water Damage
The replacement windows being damaged by water is one more indication of a bad window installation. The window would start to rot as a result of water exposure and windows that aren’t painted properly, which makes them vulnerable. The water seeps in once the paint chips or cracks in some areas. The signs indicating water damage are pools of water, bubbling paint or wallpaper, mold formation, and weird smells. It usually occurs in areas such as the window frames, sashes, and dividers. The damage isn’t clearly visible, and it can be complex and damaging to the structural integrity of the wood and is also harmful for your health. As soon as you spot the rotting areas, contact a window installer as they can fix it easily by patching and repainting the area.
The Windows Don’t Open or Close Properly
When you get replacement windows installed, you should be able to open and close them without struggling. However, if you have to force the window open or shut, this means that the window wasn’t measured or installed properly. It isn’t wise to ignore this issue, keeping in mind that if you’re having a lot of issues with it right after the installation, it would only get worse as time passes by. Without further ado, contact the manufacturer while the warranty on the window still stands.
The Caulking is Uneven and Messy
For windows to function properly, it’s necessary that during the window installation, they are sealed from both inside and out. The caulking around the outside of the window helps to seal and weather-proof it, ensuring proper insulation and protection. While the bottom edge of the window is not supposed to be caulked so the water can drip out, the top and sides must have a visible, uniform layer of caulk around them. In case the caulk layer is messy, patchy, or uneven, it’s a warning sign. Call a window installer to seal the windows properly.
There’s Condensation Between Window Panes
If you notice fog appearing between the window panes, it might be due to one of the two reasons. It might be because the seal has failed, or a result of a bad window installation. If you’ve gotten replacement windows installed at your place recently and are unable to remove the condensation even after cleaning the window exterior, it might be a result of a broken window seal during the installation.
Are You Looking for a Proper Window Installation Company in Fort Worth, TX?
Now that you’re aware of the signs of a bad window installation, you must be careful. Instead of installing the replacement windows by yourself, hire an expert window installer in the Fort Worth, TX area. If you’ve already gotten them installed and are facing any of these problems, get them fixed on immediate basis. In case you’re looking for a reliable company for window installation, contact Energy Window Solutions as we’ve got well trained and qualified professionals with the required experience that you need.